How to assign IP address with command line

For Example i am going to give following IP to my desktop
IP = 192.168.1.10
Subnetmask = 255.255.255.0
Default Gateway = 192.168.1.1
Metric = 1

Open Command Prompt 

to check existing IP address write IPCONFIG command 

As you can see existing IP address is 192.168.1.9, now we can change that IP to 192.168.1.10
For change the IP you have to write below mentioned Command.

netsh interface ip set address "Local Area Connection" static ipaddr subnetmask gateway metric

netsh interface ip set address "Local Area Connection" static 192.168.1.10 255.255.255.0 192.168.1.1 1

After the run command you just need to check the IP address again with IPCONFIG command

Its done Enjoy !!!!! :)